Quality
At True Position Technology, Inc. (TPT) all of our management and employees work together to provide our customers with 100% quality parts delivered on time True Position Technologies, Inc. - Quality Control Departmentall the time. We utilize the latest inspection equipment to insure that the highest quality standards are met for the products we manufacture. Quality in itself is fitness for purpose as defined by the customer, conformance to requirements. But is our people who build and create quality into the work they do. Product ownership takes place at the source of every process, from start to finish by each employee who performs an operation on the job. We employ the following basic guidelines to achieve these desired results:
  • TPT management clearly defines what is required.
  • The information is then relayed to all employees so that everybody knows what they have to do and what is required.
  • Employees are encouraged to have a sense of ownership by making them responsible for the job within their manufacturing cell.
  • The right equipment, processes, tools are made available to do the job right the first time.
  • Empower employees to use data, measurements, procedures and facts to drive out variation of all kinds. Train employees to use simple problem solving tools. Together with management make the changes necessary to reduce variation and cost.
Inspection Capabilities:
INSPECTION EQUIPMENT IS CALIBRATED IN ACCORDANCE WITH ISO-10012-1
1 BROWN & SHARP XCEL CMM MODEL 7107 SYSTEM B3C-LC DCC, WITH PC-DIMIS CAD FOR WINDOWS WITH PH10MQ PROBE, 28” X 40” X 28
2 M300 WESCO STEREO MICROSCOPE 3-STEP BODY WITH 6.4, 16X, 40X MAGNIFICATION WITH VERTICAL ILLUMINATOR FOR DEEP BORES
1 ROCKWELL HARDNESS TESTER
4  7" X 4.2" X 570" REICHERT STEREO STAR ZOOM MICROSCOPES WITH FIBEROPTICS
2 10" X 20" POWER SCOPES
1 14" MITUTOYO COMPUTER DIGITAL OPTICAL COMPARATOR
1 14” SCHERR TUMICO COMPUTER DIGITAL OPTICAL COMPARATOR
BROWN & SHARP MICROXCEL CMM MODEL 765 SYSTEM 3P 29.5” X 25.5” X 19.7 WITH PC-DIMIS FOR WINDOWS CAD POWERED CMM SOFTWARE
1 BROWN & SHARP GAGE 2000 CMM 18” X 20” X 16”
BRIDGEPORT SENTRY COMPUTER CMM MACHINE 20" X 20" X 12"
1 MITUTOYO ROUNDTEST RA-100 ROUNDNESS MACHINE
6

24" X 36" INSPECTION GRADE GRANITE SURFACE PLATES
2 36" X 48" INSPECTION GRADE GRANITE SURFACE PLATES
1 3" X 6" X 9" GRANITE MASTER ANGLE SQUARE
2 6" X 6" GRANITE MASTER BLOCK SQUARE
2 12" MITUTOYO DIGITAL HEIGHT MASTER WITH .0001 RESOLUTION
8   12" MITUTOYO DIGITAL HEIGHT GAGE
2 24" MITUTOYO DIGITAL HEIGHT GAGE
6 24" MITUTOYO DIGITAL HEIGHT GAGE
6 MEYER GAGE PIN SETS .011 .250
2 MEYER GAGE PIN SET .501 1.000
4 MITUTOYO GAGE BLOCK SETS .05000-4.0000

    A COMPLETE ASSORTMENT OF THREAD PLUG AND RING GAGES

    A COMPLETE SET OF GAGE MASTER RINGS

    A COMPLETE ASSORTMENT OF DIGITAL DIAL BORE GAGES

    A COMPLETE ASSORTMENT OF ID & OD MICROMETERS

    A COMPLETE SET OF DEPTH MICROMETERS

A complete assortment of other inspection equipment too numerous to list.

Employee personal inspection tools are incorporated into the True Position Technologies, Inc. calibration system.